Low-temperature material fracture testing machine is used to assess the cold resistance of materials such as rubber or wire insulation when subjected to impact at low temperatures (brittleness point).
The features a highly efficient cooling system (with options for dry ice or a refrigerator), and an automatic model (No. 121-Auto) capable of continuously testing up to 200 samples, saving time and increasing analysis accuracy.
Number of Samples : 5 samples × 40 holders (200 pieces total)
Test Sample :Type A: width 6.0 ± 0.4 mm, length 38± 2 mm,thickness 2.0 ± 0.2 mm
Striking Edge: Radius 1.6 ± 0.1 mm, clearance from the sample clamp 6.4 ± 0.2 mm, distance between the point of impact and sample clamp 8.0 ± 0.2 mm
Striking Speed: 2.0 ± 0.2 m/s
Temperature : Up to -70℃ (refrigeration control)
Heat Transfer Medium : Approximately 15 liters
PC Software : Available for Windows
Accessories: Tightening pin, torque screwdriver
Options: Type B sample holder, sample punch
Power Source: AC 200 V 3-phase 30 A 50/60 Hz
Air Source: 0.5 MPa or above
Dimensions/ Weight (Approximate):W1,160×D1,030×H2,150 mm, 612 kg
